[. . . ] Some of the graphics used may vary slightly from the product you have purchased.
i350/i250
4 Install the Ink Tanks
Remove the black ink tank (BCI-24 Black) from its package and pull off the orange protective cap.
NOTE: To avoid spilling ink, do not touch the bottom of the tank once you have removed the protective cap.
Series Color Bubble Jet Printer
2 Prepare the Printer
Remove all shipping tape from the printer.
3 Install the Print Head
Remove the print head from its package.
the Printer 5 ConnectComputer To Your
Plug the power cord into the back of the printer and connect the other end to a power outlet.
Carefully remove all items from the box.
Tear at notch to open
Protective cap
Remove the orange protective cap.
Shipping Tape
NOTE: Do not touch the electrical contacts on the back and bottom of the print head.
Open the front cover. [. . . ] Press down until the ink tank locks into place
50 Series Color Bubble Jet Printer
Connect one end of a USB cable (not included) to the computer, the other to the printer.
Serial number
Raise the gray lock lever on the printer.
i350/i250 Series Print Head
Click
Packing material
Print head holder
Power Cord
Repeat the procedure for the color ink tank (BCI-24 Color), inserting it into the remaining slot. Close the front cover.
NOTE: The serial number is located to the to register the product.
Slide the print head into the holder until it is securely seated.
Ink Tanks BCI-24 Color
Pull out the paper rest and the output tray (i350 only).
USB Port
USB Cable
Lower the lever until it locks into place.
Continue with Step 6 on side two.
Documentation and Software Kit
NOTE: USB cable not included.
(Window 6 Install the Printer Driver (Windows )
®
t 6 Install the Printer Driver (Macintosh )
®
g 7 Align the Print Head
Turn the computer on and LEAVE THE PRINTER OFF.
NOTE: For Windows® XP or Windows 2000, log on to Windows as an Administrator before continuing.
When Terminate Installation window appears, click OK.
Turn on your Mac and your printer and insert the "Setup Software & User's Guide" CD-ROM.
Click Install. When a message asking for your confirmation to proceed with the installation, click Continue Installation.
Place a sheet of blank paper in the paper rest. Start, select Control Panel, Printers and Other Hardware, then Printers and Faxes. Macintosh HD icon, then the Utilities folder, then the Print Center icon. r Select i350 or i250.
When the "Welcome to the BJ printer driver Installer" screen appears, click Continue.
NOTE: Be sure to register your product. The serial number is located on the inside of the printer, to the right of the print head.
Read the Software License Agreement and click Continue, then click Agree. The software will begin identifying the printer port being used.
Under the Printers menu, select Configure Printer. [. . . ] Click OK (Windows) or Send (Macintosh) when finished.
QA7-2709-V01 ©2003 Canon U. S. A. [. . . ]